Post by ferojarahman123 on Feb 14, 2024 3:36:25 GMT -6
If we opt for a geothermal or aerothermal installation to air condition our home, we are opting for renewable and clean energies that help us save on our electricity bill, while contributing to preserving the environment. But they are two different energy sources as we explain in this post; Both have their advantages and disadvantages. Let's start by clarifying the concept before entering into the geothermal vs. aerothermal. Geothermal energy takes advantage of the constant temperature that exists in the subsoil to achieve heat in summer or cold in winter. It can also be used to have domestic hot water . Through perforations in the subsoil, we inject water so that it cools or heats, depending on the season, due to contact with that fixed temperature that exists deep in the earth.
The water then passes to a thermodynamic machine that finishes regulating the temperature at which we want it to come out. Thermal distribution is done through France Phone Number List emitters, francs or underfloor heating. Thus, if the temperature inside the earth is 11 degrees and we want to raise it to 22 degrees, which can be considered a comfort temperature, the machine will only have to make a small consumption to raise it to that temperature. Aerothermal energy takes advantage of the ambient temperature that exists in the outside air to extract the heat or cold that we need at home. Aerothermal energy takes advantage of a special heat pump to obtain more degrees of temperature in winter or to cool in summer. The energy found in the environment passes through this heat pump and is introduced into the home at the necessary comfort temperature. To do this, the pump uses a compressed refrigerant gas that is capable of extracting the heat found in the outside air.
Geothermal or aerothermal: what should I choose? So what is better, geothermal or aerothermal? Well, both have their advantages and disadvantages. Advantages and disadvantages of Geothermal The great advantage of geothermal energy is its greater energy savings. By taking advantage of the constant temperature inside the earth, the additional energy expenditure we need to raise the temperature is lower. We save a lot of electricity thanks to this. It also has the enormous advantage of having a reduced maintenance cost. Geothermal equipment has very little wear and tear and its useful life is very long, which means that the installation pays for itself quickly. On the other hand, we have a higher investment cost, since we have to drill.
The water then passes to a thermodynamic machine that finishes regulating the temperature at which we want it to come out. Thermal distribution is done through France Phone Number List emitters, francs or underfloor heating. Thus, if the temperature inside the earth is 11 degrees and we want to raise it to 22 degrees, which can be considered a comfort temperature, the machine will only have to make a small consumption to raise it to that temperature. Aerothermal energy takes advantage of the ambient temperature that exists in the outside air to extract the heat or cold that we need at home. Aerothermal energy takes advantage of a special heat pump to obtain more degrees of temperature in winter or to cool in summer. The energy found in the environment passes through this heat pump and is introduced into the home at the necessary comfort temperature. To do this, the pump uses a compressed refrigerant gas that is capable of extracting the heat found in the outside air.
Geothermal or aerothermal: what should I choose? So what is better, geothermal or aerothermal? Well, both have their advantages and disadvantages. Advantages and disadvantages of Geothermal The great advantage of geothermal energy is its greater energy savings. By taking advantage of the constant temperature inside the earth, the additional energy expenditure we need to raise the temperature is lower. We save a lot of electricity thanks to this. It also has the enormous advantage of having a reduced maintenance cost. Geothermal equipment has very little wear and tear and its useful life is very long, which means that the installation pays for itself quickly. On the other hand, we have a higher investment cost, since we have to drill.